Solar battery owners must consider the battery’s lifespan to ensure that the products are reliable, long-lasting, and successful in aiding energy production. Due to the design, they should be able to survive temperature fluctuations independently.
Therefore, many different solar battery owners need comprehensive knowledge of solar batteries to ensure the following proper processes to increase their shelf life. That’s not all; the types of batteries also must be considered.
- Every Two To Four Weeks, Add Distilled Water
Batteries lose part of their water during the charging process. They must be refilled with distilled water regularly if you want them to continue working correctly and stay in running conditions.
Take notice that distilled water is the only water you should use. The battery’s chemistry will be harmed if it is recharged with tap water instead of distilled water, which contains microscopic contaminants.
- Equalization Measures
Overcharging your batteries is called equalization. Overcharging may be helpful to your batteries, despite its bad reputation. Over time, the constant cycling of your deep cycle battery might result in uneven charging of the individual cells in your battery.
When this happens, the battery’s plates may get sulfated because specific cells cannot get a complete charge regularly. Sulfation collected during gassing may be reduced via equalization, which allows all compartments to return to their maximum amount and eliminate part of it. To prevent electrolyte stratification, gassing might aid in mixing your electrolyte.
- Solar Batteries Should Never Be Left Without A Charge
When solar batteries are stored in storage for an extended time, they are in danger of being destroyed. An always-on power source will provide proper battery charging and an always-on solar light for any setup.
- Rotate Your Device’s Batteries
If your battery bank is large, it’s a good idea to rotate the batteries in the bank regularly. As a result, it may not be feasible to charge the batteries in the middle of the bank fully. Keeping the batteries in a different location regularly will help restore equilibrium.
- The State Of Charge, Or SoC
Your battery’s charge level may be determined using a refractometer and the product’s user manual instructions. They may need to be changed if they still do not maintain their charge after going through a complete charging cycle. Because batteries lose capacity with time, it’s critical to check the age of your batteries and replace them as the manufacturer recommends.
Lithium-Ion Solar Battery Maintenance
They are popular among homeowners since they need the minor maintenance of all available solar backup systems. To ensure that they are holding the charge properly, you must check an occasional state of charge reading once they have been professionally installed and set up. Installer-recommended tools may be used to do this (they are unique to each manufacturer as they communicate with a built-in battery management system).
Consider tightening any loose wires or terminals that you find. Lastly, make sure that the batteries are free of dust. Always use insulated tools, gloves, and eye and face protection, as previously advised.
Conclusion
Batteries and solar panels operate in tandem to get the best results. Solar batteries are your best option to limit your environmental effect, protect solar energy’s worth, or offer a backup power source that is as reliable as possible.